|
|
Post by seismic on Nov 8, 2010 21:22:43 GMT
Looking to upgrade my Shimano rotors. Ones fitted are splined 160 mm shimano deore. chain reaction has 203 for bargain price of £10  plus of course need new brackets which I can get from disco brakes. Does anyone know what tool do I need to remove/ fit these rotors? |
|
|
|
Post by gruffalo on Nov 8, 2010 21:34:08 GMT
It's the same size tool as the one you use for removing shimano cassettes. They're only a couple of quid and just about every bike shop in the country should have one in stock!! One word of warning though, the tool I had wasn't deep enough and fouled on the cone nuts before it could pick up the rotor......I had to take it into work and chuck it on the lathe. So if you buy one make sure it's for cassettes AND rotors......and keep the receipt!! This is the one I bought: www.chainreactioncycles.com/Models.aspx?ModelID=7975 |
|
|
|
Post by seismic on Nov 8, 2010 22:49:19 GMT
Thanks for the info, now have reason to spend some money!!
|
|
plus of course need new brackets which I can get from disco brakes. Does anyone know what tool do I need to remove/ fit these rotors?