Post by mikehardy on May 30, 2012 20:39:58 GMT
Now i was upgrading my rotors orginally looked at a standard 203mm but historically i've never found a perfectly straight 8" disc so picked this thing up for a bargain as the stiff ally center keeps the outer braking surface nicely in-line
The 8" floating saw tooth is very light for such a big disc, i was quite surprised.
the bottom mount on the deore caliper (i assume all shimano too but i wouldn't really want to do this to XTR eh!!!!
)
post filing, took about 2-3mm off
rivet to calliper clearance
Finished product
My next post in this forum will be strip down and bearing replacement on WTB rear hubs
The 8" floating saw tooth is very light for such a big disc, i was quite surprised.
the bottom mount on the deore caliper (i assume all shimano too but i wouldn't really want to do this to XTR eh!!!!
)post filing, took about 2-3mm off
rivet to calliper clearance
Finished product
My next post in this forum will be strip down and bearing replacement on WTB rear hubs