|
Post by andyt on Nov 19, 2012 18:47:21 GMT
hi id like to run a xo front mech on a 9 speed. but they only do them for 10 speeds, would the 10 speed be ok to use for 9 speed??
chain width may be an issue what do you think?
thanks in advance andy
|
|
|
Post by oldgit on Nov 19, 2012 21:06:28 GMT
Doubt there being a problem; I've run a 9 speed front changer on an 8 speed; similar difference. It's the lever that controls the cable release movement
|
|
|
Post by Ross on Nov 19, 2012 22:11:09 GMT
May catch slightly in 1st or 9th depending upon how you set it up.
|
|
|
Post by andyt on Nov 19, 2012 22:20:29 GMT
thanks for the replies think i will giv it a go will post haw it turns out
fhanks again andy
|
|